STG3699| Datasheet

STG3699, STG3699QTR, STG3699TTR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STG3699
LOW VOLTAGE 0.5 MAX QUAD SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE

HIGH SPEED: tPD = 0.3ns (TYP.) at VCC = 3.0V tPD = 0.4ns (TYP.) at VCC = 2.3V ULTRA LOW POWER DISSIPATION: ICC = 0.2uA (MAX.) at TA = 85 C LOW "ON" RESISTANCE VIN=0V: RON = 0.5 (MAX. TA = 25 C) at VCC = 2.7V RON = 0.8 (MAX. TA = 25 C) at VCC = 2.3V RON = 3.0 (MAX. TA = 25 C) at VCC = 1.8V WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 1.65V to 4.3V SINGLE SUPPLY 4.3V TOLERANT AND 1.8V COMPATIBLE THRESHOLD ON DIGITAL CONTROL INPUT at VCC = 2.3 to 3.0V LATCH-UP PERFORMANCE EXCEEDS 300mA (JESD 17) ESD PERFORM. (ANALOG CHAN. vs GND): HBM > 7KV (MIL STD 883 method 3015)

QFN

TSSOP

Table 1: Order Codes
PACKAGE TSSOP QFN T&R STG3699TTR STG3699QTR

DESCRIPTION The STG3699 is an high-speed CMOS LOW VOLTAGE QUAD ANALOG S.P.D.T. (Single Pole Dual Throw) SWITCH or 2:1 Multiplexer/ Demultiplexer Switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65V to 4.3V, making this device ideal for portable applications. It offers very low ON-Resistance (<0.5) at VCC=3.0V. The nIN inputs are provided to control the switches. The switches nS1 are ON (they are Figure 1: Pin Connection

connected to common Ports Dn) when the nIN input is held high and OFF (high impedance state exists between the two ports) when nIN is held low; the switches nS2 are ON (they are connected to common Ports Dn) when the nIN input is held low and OFF (high impedance state exists between the two ports) when IN is held high. Additional key features are fast switching speed, Break Before Make Delay Time and Ultra Low Power Consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage. It's available in the commercial temperature range in TSSOP and QFN3x3mm package.

August 2005

Rev. 5

1/12