STOD2540| Datasheet

STOD2540, STOD2540PMR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STOD2540
PMOLED display power supply
Feature summary

Inductor switcher boost controller. PFM mode control. High efficiency over wide range of load (1mA to 40mA). Integrated Load disconnect switch. Over voltage protection with automatic restart Soft start with adjustable peak current limit Enable pin Low shutdown current. Small external inductor. Supply voltage from 3.0V to 5.5V STOD2540 is a boost converter that operates from 3.0V to 5.5V and can provide an output voltage as high as 25V. The output current capability is maximum 40mA up to 25V output voltage. The regulation is performed by a resistor divider network (Figure 3.) that detects the output voltage. In this state-of-the-art boost converter, a DC current path exists between the battery source and the load. In order to reduce the consumption in Shutdown mode, a high-side load isolation switch is necessary to cut this DC current path in Standby mode. The Load Disconnect Switch (LDS) actsas an isolation switch in Shutdown mode.
QFN8 (3mm x 3mm)

Application

PMOLED display driver

Description
STOD2540 is dedicated to Passive Matrix OLED (PMOLED) displays for portable handsets and provides the pre-charge and biasing voltage of the column matrix driver as shown in Figure 3. The current capability of STOD2540 allows feeding a 1", 1.3" or 1.5" color PMOLED.

Order codes
Part number STOD2540PMR September 2006 Package QFN8 (3mm x 3mm) Rev. 5 Packaging 4500 parts per reel 1/19
www.st.com
19