STPIC6C595| Datasheet

STPIC6C595, STPIC6C595MTR, STPIC6C595TTR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STPIC6C595
Power logic 8-bit shift register
Features

Low RDS(on): 4 typ 30mJ avalanche energy eight 100mA DMOS outputs 250mA current limit capability 33V output clamp voltage Device are cascadable Low power consumption SO-16 TSSOP16

Description
This STPIC6C595 is a monolithic, mediumvoltage, low current power 8-bit shift register designed for use in systems that require relatively moderate load power such as LEDs. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other low-current or medium-voltage loads. The device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through both the shift and storage register clock (SRCK) and the register clock (RCK), respectively. The device transfers data out the serial output (SER OUT) port on the rising edge of SRCK. The storage register transfers data to the output buffer when shift register clear (CLR) is high. When CLR is low, the input shift register is cleared. When output enable (G) is held high, all data in the output buffer is held low and all drain output are off. When G is held low, data from the storage register is transparent to the
output buffer. When data in the output buffers is low, the DMOS transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability. The SER OUT allows for cascading of the data from the shift register to additional devices. Output are low-side, open-drain DMOS transistors with output ratings of 33V and 100mA continuous sink-current capability. Each output provides a 250 mA maximum current limit at TC = 25 C. The current limit decreases as the junction temperature increases for additional device protection. The device also provides up to 1.5KV of ESD protection when tested using the humanbody model and 200V machine model. The STPIC6C595 is characterized for operation over the operating case temperature range of 40 C to 125 C.

Table 1. Device summary
Part Number STPIC6C595MTR STPIC6C595TTR Package SO-16 (Tape & Reel) TSSOP16 (Tape & Reel) Packaging 2500 parts per reel 2500 parts per reel

May 2007

Rev 3

1/22
www.st.com 22