STX-RLINK| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STX-RLINK
Raisonance's in-circuit debugger/programmer for ST7, uPSD, STR7 and STR9
The RLink (STX-RLINK) is Raisonance's versatile, low-cost, in-circuit debugger and programmer for ST7, uPSD, STR7 and STR9 microcontrollers. It connects to application or evaluation boards for in-circuit programming and debugging via an industry standard JTAG connection for ARM core-based and uPSD microcontrollers, or via STMicroelectronic's InCircuit Communication (ICC) connection for ST7 microcontrollers. RLink driven by Raisonance's RIDE integrated development environment provides both in-circuit debugging and programming of applications for ST7 and uPSD, and in-circuit programming of STR7/9 microcontrollers. In combination with Raisonance's free RFlasher programming software, RLink can be used as a very-low cost, dedicated in-circuit programmer for ST7, uPSD or STR7/9. Figure 1. RLink and connection adapters

Architecture
RLink Raisonance's in-circuit debugging and programming tool supports both JTAG and ICC protocols and connects to your application board via one of three adapters:

you to erase, program view and verify microcontroller memory. RFlasher also includes automated mode for automatic execution of programming sequences for mass programming and project mode that allows you to save your programming configuration.

10-pin ICC adapter for ST7 microcontrollers 14-pin JTAG adapter for uPSD microcontrollers 20-pin JTAG adapter for STR7 and STR9 microcontrollers

Key Features
RLink:

RIDE Raisonance's integrated development environment drives the RLink and offers seamless control of software development tools (compiler, assembler, linker, debugger, etc.) from an intuitive graphical interface. It offers full integration of the relevant C/C++ toolsets, project management, code editor and SIMICE instruction set simulator. The optional Code Compressor, the post link code optimizer is available for both ST7 and uPSD. RFlasher Raisonance's easy-to-use device programming interface that drives RLink, allows

In-circuit debugging and programming Connection to application board via JTAG standard, or ST standard ICC connection USB interface to host PC Powered from USB

Note: RLinks included with REva starter kits for STR7/9 (STRxxx-SK/RAIS from ST) and Professional Kits for STR7/9 (STXPRO/RAIS from ST) allow debugging of both STR7 and STR9 microcontrollers.

June 2006

Rev 3

1/4
www.st.com
4