TS274| Datasheet

TS274, TS274ACD, TS274ACDT, TS274ACN, TS274AID, TS274AIDT, TS274AIN, TS274CD, TS274CDT, TS274CN, TS274ID, TS274IDT, TS274IN

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

TS274
High performance CMOS quad ooperational amplifiers

Output voltage can swing to ground Excellent phase margin on capacitive loads Gain bandwidth product: 3.5MHz Stable and low offset voltage Three input offset voltage selections N DIP-14 (Plastic Package)

Description
The TS274 devices are low cost, quad operational amplifiers designed to operate with single or dual supplies. These operational amplifiers use the ST silicon gate CMOS process allowing an excellent consumption-speed ration. These series are ideally suited for low consumption applications. Three power consumptions are available allowing to have always the best consumption-speed ratio: ICC = 10uA/amp.: TS27L4 (very low power) ICC = 150uA/amp.: TS27M4 (low power) ICC = 1mA/amp.: TS274 (standard) These CMOS amplifiers offer very high input impedance and extremely low input currents. The major advantage versus JFET devices is the very low input currents drift with temperature (see figure 2).

D SO-14 (Plastic Micropackage)

P TSSOP14 (Thin Shrink Small Outline Package)

Pin connections (top view)
Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 5 Inverting Input 2 6 Output 2 7 + + + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3

April 2006

Rev. 2

1/15
www.st.com
15