VN5050AJ-E| Datasheet

VN5050AJ-E, VN5050AJTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VN5050AJ-E
Single channel high side driver with analog current sense for automotive applications
Features
Max supply voltage Operating voltage range Max On-State resistance Current limitation (typ) Off state supply current

VCC VCC RON ILIMH IS

41 V 4.5 to 36V 50 m 16.5 A 2 uA
PowerSSO-12

Reverse battery protection ( see Application schematic ) Electrostatic discharge protection

General features Inrush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive Diagnostic functions Proportional load current sense High current sense precision for wide range currents Current sense disable Thermal shutdown indication Very low current sense leakage Protection Undervoltage shut-down Overvoltage clamp Load current limitation Self limiting of fast thermal transients Protection against loss of ground and loss of VCC Thermal shut down Device summary

Application

All types of resistive, inductive and capacitive loads Suitable as LED driver

Description
The VN5050AJ-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long overload duration, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.

Table 1.

Order codes Package Tube PowerSSO-12 VN5050AJ-E Tape and Reel VN5050AJTR-E

February 2008

Rev 6

1/31
www.st.com 31