VN540-12-E| Datasheet

VN540-12-E, VN540-E, VN540SP-E, VN540SPTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VN540-E / VN540SP-E VN540-12-E
SINGLE HIGH SIDE SMART POWER SOLID STATE RELAY
General Features
Type VN540-E VN540SP-E VN540-12-E

Vdemag

RDSon

Iout

VCC

VCC-55V

50m

2.8A

36V

PENTAWATT(012Y)

PENTAWATT

OUTPUT CURRENT (CONTINUOUS) : 2.8A DIGITAL INPUT CLAMPED AT 32V PROTECTION AGAINST: LOSS OF GROUND SHORTED LOAD AND OVERTEMPERATURE BUILT-IN CURRENT LIMITER UNDERVOLTAGE SHUT-DOWN OPEN DRAIN DIAGNOSTIC OUTPUT FAST DEMAGNETIZATION OF INDUCTIVE LOADS
PowerSO-10TM

Description
The VN540-E, VN540SP-E, VN540-12-E are monolithic devices designed in STMicroelectronics VIPower technology, intended for driving resistive or inductive loads with one side connected to ground. Active current limitation avoids the system power supply dropping in case of shorted load. Built-in thermal shut-down protects the chip from overtemperature. The open drain diagnostic output indicates overtemperature conditions.

Block Diagram

November 2005

Rev 1 1/13
www.st.com 13