Home

VN610SP| Datasheet

By datasheet - April 3rd, 2008

VN610SP, VN610SP13TR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)


VN610SP

SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY
TYPE VN610SP
s OUTPUT s

RDS(on) 10m

IOUT 45A

VCC 36 V

CURRENT: 45 A

10

CMOS COMPATIBLE INPUT s PROPORTIONAL LOAD CURRENT SENSE
s

UNDERVOLTAGE AND OVERVOLTAGEn

1

SHUT-DOWN s OVERVOLTAGE CLAMP THERMAL SHUT DOWN s CURRENT LIMITATION s VERY LOW STAND-BY POWER DISSIPATION s PROTECTION AGAINST: n LOSS OF GROUND AND LOSS OF VCC s REVERSE BATTERY PROTECTION (*)
s

PowerSO-10TM ORDER CODES
PACKAGE TUBE T&R VN610SP13TR

PowerSO-10TM VN610SP

DESCRIPTION The VN610SP is a monolithic device made using STMicroelectronics VIPower M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin BLOCK DIAGRAM

voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio). Active current limitation combined with thermal shut-down and automatic restart protect the device against overload. Device automatically turns off in case of ground pin disconnection.

VCC

VCC CLAMP

OVERVOLTAGE UNDERVOLTAGE PwCLAMP
DRIVER

OUTPUT ILIM VDSLIM IOUT K CURRENT SENSE

GND LOGIC INPUT

OVERTEMP.

(*) See application schematic at page 9

Rev. 1
1/18

June 2004


VN610SP Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VN610SP datasheet

Permalink: http://datasheet.emcelettronica.com/st/VN610SP

-->