VN820-E| Datasheet

VN820-E, VN820B5-E, VN820B5TR-E, VN820PT-E, VN820PTTR-E, VN820SO-E, VN820SOTR-E, VN820SP-E, VN820SPTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VN820-E / VN820B5-E VN820PT-E / VN820SO-E / VN820SP-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN820-E VN820B5-E VN820PT-E VN820SO-E VN820SP-E RDS(on) IOUT VCC

Figure 1. Package

40 m

36 V

PowerSO-10TM

P2PAK

PPAK

CMOS COMPATIBLE INPUT ON STATE OPEN LOAD DETECTION OFF STATE OPEN LOAD DETECTION SHORTED LOAD PROTECTION UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN PROTECTION AGAINST LOSS OF GROUND VERY LOW STAND-BY CURRENT

PENTAWATT

SO-16L

REVERSE BATTERY PROTECTION (*) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE

DESCRIPTION The VN820-E, VN820SP-E, VN820B5-E, VN820SO-E, VN820PT-E are monolithic devices made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Table 2. Order Codes
Package PENTAWATT PowerSO-10TM P2PAK SO-16L PPAK
Note: (*) See application schematic at page 9.

Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device detects open load condition both is on and off state. Output shorted to V CC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

Tube VN820-E VN820SP-E VN820B5-E VN820SO-E VN820PT-E -

Tape and Reel

VN820SPTR-E VN820-B5TR-E VN820SOTR-E VN820PTTR-E

Rev. 3 February 2005 1/38