VN920SP-E| Datasheet

VN920SP-E, VN920SPTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VN920SP-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN920SP-E
s s

Figure 1. Package
IOUT 30 A VCC 36 V

RDS(on) 15m

CMOS COMPATIBLE INPUT PROPORTIONAL LOAD CURRENT SENSE s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s OVERVOLTAGE CLAMP s THERMAL SHUTDOWN s CURRENT LIMITATION PROTECTION AGAINST LOSS OF GROUND AND LOSS VCC s VERY LOW STAND-BY POWER DISSIPATION
s

PowerSO-10TM

REVERSE BATTERY PROTECTION (*) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
s

DESCRIPTION The VN920SP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. Device automatically turns off in case of ground pin disconnection.

Table 2. Order Codes
Package Tube VN920SP-E Tape and Reel VN920SPTR-E

PowerSO-10
Note: (*) See application schematic at page 9.

Rev. 1 October 2004 1/18