VND10B| Datasheet

VND10B, VND10B(011Y), VND10B(012Y)

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND10B
DOUBLE CHANNEL HIGH SIDE SMART POWER SOLID STATE RELAY
Table 1. General Features
Type VND10B VDSS 40 V RDS(on) 0.1 In(1) 3.4 A VCC 26 V

Figure 1. Package

Note: 1. In= Nominal current according to ISO definition for high side automotive switch. The Nominal Current is the current at Tc = 85 C for battery voltage of 13V which produces a voltage drop of 0.5 V.

OUTPUT CURRENT (CONTINUOUS): 14 A @ Tc=85 C PER CHANNEL 5V LOGIC LEVEL COMPATIBLE INPUT THERMAL SHUT-DOWN UNDER VOLTAGE PROTECTION OPEN DRAIN DIAGNOSTIC OUTPUT INDUCTIVE LOAD FAST DEMAGNETIZATION VERY LOW STAND-BY POWER DISSIPATION
PENTAWATT (vertical) PENTAWATT (horizontal)

DESCRIPTION The VND10B is a monolithic device made using STMicroelectronics VIPower Technology, intended for driving resistive or inductive loads with one side grounded. This device has two channels, and a common diagnostic. Built-in thermal shut-down protects the chip from over temperature and short circuit. The status output provides an indication of open load in on state, open load in off state, overtemperature conditions and stuck-on to VCC. Table 2. Order Codes
Package PENTAWATT Vert. PENTAWATT Hor. PENTAWATT In line Tube VND10B VND10B(011Y) VND10B(012Y)

PENTAWATT (in-line)

Tape and Reel

REV. 2 June 2004 1/13