VND5004A-E| Datasheet

VND5004A-E, VND5004ASP30-E, VND5004ASP30TR-E, VND5004ATR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND5004A-E VND5004ASP30-E
Double 4m high side driver with analog current sense for automotive applications
Features
Max transient supply voltage Operating voltage range Max On-State resistance (per ch.) Current limitation (typ) Off state supply current
1. Typical value with all loads connected

VCC VCC RON ILIMH IS

41V 4.5 to 27V 4 m
MultiPowerSO-30 PQFN - 12x12 Power lead-less

100A 2 uA(1)

Application

General Inrush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive Diagnostic functions Proportional load current sense Current sense disable Thermal shutdown indication Protection Undervoltage shut-down Overvoltage clamp Load current limitation Thermal shut down Self limiting of fast thermal transients Protection against loss of ground and loss of VCC Reverse battery protection with self switch on of the PowerMOS (see Application schematic on page 18) Electrostatic discharge protection Devices summary
Package Tube PQFN-12x12 Power lead-less MultiPowerSO-30 VND5004ASP30-E

All types of resistive, inductive and capacitive loads Suitable for power management applications

Description
The VND5004ATR-E and VND5004ASP30-E are devices made using STMicroelectronics VIPower technology. They are intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp and load dump protection circuit protect the devices against transients on the Vcc pin (see ISO7637 transient compatibility table). These devices integrate an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is high impedance. Output current limitation protects the devices in overload condition. In case of long duration overload, the devicesa limit the dissipated power to a safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as a fault condition disappears.
Order codes Tape and Reel VND5004ATR-E VND5004ASP30TR-E Tray VND5004A-E -

Table 1.

December 2007

Rev 5

1/34
www.st.com 34