VND5025AK-E| Datasheet

VND5025AK-E, VND5025AKTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND5025AK-E
Double channel high side driver with analog current sense for automotive applications
Features
Max transient supply voltage Operating voltage range Max On-State resistance (per ch.) Current limitation (typ) Off state supply current
1. Typical value with all loads connected.

VCC RON ILIMH IS

41V
PowerSSO-24TM

VCC 4.5 to 36V 25 m 41 A 2 uA(1)

Electrostatic discharge protection

Application

Main In-rush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive Package: ECOPACK Diagnostic functions Proportional load current sense High current sense precision for wide range currents Current sense disable Thermal shutdown indication Very low current sense leakage Protection Undervoltage shut-down Overvoltage clamp Load current limitation Self-limiting of fast thermal transients Protection against loss of ground and loss of VCC Thermal shut down Reverse battery protection (see Application schematic) Table 1. Device summary

All types of resistive, inductive and capacitive loads Suitable as LED driver

Description
The VND5025AK-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology, intended for driving resistive or inductive loads with one side connected to ground, and suitable for driving LEDs. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long overload duration, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.

Order codes Package Tube PowerSSO-24TM VND5025AK-E Tape and Reel VND5025AKTR-E

February 2008

Rev 7

1/31
www.st.com 1