VND5160J-E| Datasheet

VND5160J-E, VND5160JTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND5160J-E
Double channel high side driver for automotive applications
Features
Max supply voltage Operating voltage range Max on-state resistance Current limitation (typ) Off state supply current (typ)
1. Typical value with all loads connected.

VCC VCC RON ILIMH IS

41V 4.5 to 36V 160 m 5A 2 uA
(1)

PowerSSO-12

Electrostatic discharge protection

Application

General Inrush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive Diagnostic functions Open drain status output On state open load detection Off state open load detection Thermal shutdown indication Protection Undervoltage shut-down Overvoltage clamp Output stuck to Vcc detection Load current limitation Self limiting of fast thermal transients Protection against loss of ground and loss of VCC Thermal shut down Reverse battery protection (see Figure 28) Device summary

All types of resistive, inductive and capacitive loads

Description
The VND5160J-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition in both ON and OFF states, when STAT_DIS is left open or driven low. Output shorted to VCC is detected in the OFF state. When STAT_DIS is driven high, the STATUS pin is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.

Table 1.

Order codes Package Part number (Tube) PowerSSO-12 VND5160J-E Part number (Tape & Reel) VND5160JTR-E

December 2007

Rev 5

1/31
www.st.com 31