VND810, VND81013TR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND810
DOUBLE CHANNEL HIGH SIDE DRIVER

TYPE VND810 (*)
s Per each channel

RDS(on) 160 m (*)

IOUT 3.5 A (*)

VCC 36 V

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT
s s

SO-16 ORDER CODES
PACKAGE TUBE VND810 T&R VND81013TR

SO-16

REVERSE BATTERY PROTECTION (**) compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

DESCRIPTION The VND810 is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient BLOCK DIAGRAM

Vcc

Vcc CLAMP

OVERVOLTAGE UNDERVOLTAGE

GND INPUT1 STATUS1

CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP. 1 LOGIC OPENLOAD ON 1 CURRENT LIMITER 2 DRIVER 2 OUTPUT2

INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD OFF 2 OVERTEMP. 2 OPENLOAD ON 2

(**) See application schematic at page 8

Rev. 1
1/19

July 2004

VND810 Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VND810 datasheet

Permalink: http://datasheet.emcelettronica.com/st/VND810

VND810 DATASHEET