VND810MSP-E| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND810MSP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Type VND810MSP-E (*) Per each channel RDS(on) 150 m (*) Iout 0.6 A (*) VCC 36 V

Figure 1. Package

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS ON STATE OPEN LOAD DETECTION OFF STATE OPEN LOAD DETECTION SHORTED LOAD PROTECTION UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN PROTECTION AGAINST LOSS OF GROUND VERY LOW STAND-BY CURRENT

PowerSO-10TM

REVERSE BATTERY PROTECTION (**) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE

DESCRIPTION The VND810MSP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The current limitation threshold is aimed at detecting the 21W/12V standard bulb as an overload fault. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

Table 2. Order Codes
Package PowerSO-10TM
Note: (**) See application schematic at page 9

Tube VND810MSP-E

Tape and Reel VND810MSPTR-E

Rev. 2 March 2005 1/20