VND810PEP-E, VND810PEPTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND810PEP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
TARGET SPECIFICATION

Table 1. General Features
TYPE VND810PEP-E
(*) Per each channel

Figure 1. Package
IOUT 3.5 A (*) VCC 36 V

RDS(on) 160 m (*)

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS ON STATE OPEN LOAD DETECTION OFF STATE OPEN LOAD DETECTION SHORTED LOAD PROTECTION UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN PROTECTION AGAINST LOSS OF GROUND VERY LOW STAND-BY CURRENT REVERSE BATTERY PROTECTION (**) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE

PowerSSO-12

DESCRIPTION The VND810PEP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

Table 2. Order Codes
Package PowerSSO-12
Note: (**) See application schematic at page 9

Tube VND810PEP-E

Tape and Reel VND810PEPTR-E

Rev. 4 November 2004 1/15 This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice.

VND810PEP-E Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VND810PEP-E datasheet

Permalink: http://datasheet.emcelettronica.com/st/VND810PEP-E

VND810PEP-E DATASHEET