VND830, VND83013TR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND830
DOUBLE CHANNEL HIGH SIDE DRIVER

TYPE VND830

RDS(on) 60 m (*)

IOUT 6 A (*)

VCC 36 V

(*) Per each channel

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT
s s s

SO-16L ORDER CODES
PACKAGE SO-16L TUBE VND830 T&R VND83013TR

REVERSE BATTERY PROTECTION (**) energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both is on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

DESCRIPTION The VND830 is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the devices against low BLOCK DIAGRAM

VCC

VCC CLAMP

OVERVOLTAGE UNDERVOLTAGE

GND INPUT1 STATUS1

CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP. 1 LOGIC OPENLOAD ON 1 CURRENT LIMITER 2 DRIVER 2 OUTPUT2

INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD OFF 2 OVERTEMP. 2 OPENLOAD ON 2

(**) See application schematic at page 8

Rev. 1
1/20

July 2004

VND830 Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VND830 datasheet

Permalink: http://datasheet.emcelettronica.com/st/VND830

VND830 DATASHEET