Home

VND830L| Datasheet

By datasheet - April 3rd, 2008

VND830L, VND830LSP, VND830LSP13TR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)


VND830LSP
DOUBLE CHANNEL HIGH SIDE DRIVER

TYPE VND830LSP
(*) Per each channel

RDS(on) 60 m (*)

IOUT 18 A (*)

VCC 36 V

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT
s s s

10

1

PowerSO-10TM
ORDER CODES PACKAGE TUBE T&R PowerSO-10TM VND830LSP VND830LSP13TR

REVERSE BATTERY PROTECTION (**) compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. The openload threshold is aimed at detecting the 5W/12V standard bulb as an openload fault in the on state. Device automatically turns off in case of ground pin disconnection.

DESCRIPTION The VND830LSP is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient BLOCK DIAGRAM

VCC

VCC CLAMP

OVERVOLTAGE UNDERVOLTAGE

GND INPUT1 STATUS1

CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP. 1 LOGIC OPENLOAD ON 1 CURRENT LIMITER 2 DRIVER 2 OUTPUT2

INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD OFF 2 OVERTEMP. 2 OPENLOAD ON 2

(**) See application schematic at page 8

Rev. 1
1/19

July 2004


VND830L Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VND830L datasheet

Permalink: http://datasheet.emcelettronica.com/st/VND830L

-->