VND830LSP-E| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND830LSP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Type VND830LSP-E RDS(on) 60m (*)

Figure 1. Package
Iout
18A (*)

VCC
36V

(*) Per each channel
s

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT
s

PowerSO-10TM

REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
s

DESCRIPTION The VND830LSP-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient

compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. The openload threshold is aimed at detecting the 5W/12V standard bulb as an openload fault in the on state. Device automatically turns off in case of ground pin disconnection.

Table 2. Order Codes
Package PowerSO-10TM
Note: (**) See application schematic at page 9

Tube VND830LSP-E

Tape and Reel VND830LSPTR-E

Rev. 1 October 2004 1/20