VND830MSP-E| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND830MSP-E
DOUBLE CHANNEL HIGH SIDE DRIVER

Table 1. General Features
Type VND830MSP-E
(*) Per each channel

Figure 1. Package
IOUT
6 A (*)

RDS(on) 60 m (*)

VCC
36 V

CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT
s s s s

PowerSO-10TM

REVERSE BATTERY PROTECTION (**) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to V CC is detected in the off state. The openload threshold is aimed at detecting the 5W/ 12V standard bulb as an openload fault in the on state. Device automatically turns off in case of ground pin disconnection.

DESCRIPTION The VND830MSP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

Table 2. Order Codes
Package PowerSO-10TM
Note: (**) See application schematic at page 9

Tube VND830MSP-E

Tape and Reel VND830MSPTR-E

REV. 1
October 2004 1/20