Home

VND830SP| Datasheet

By datasheet - April 3rd, 2008

VND830SP, VND830SP13TR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)


VND830SP
DOUBLE CHANNEL HIGH SIDE DRIVER

TYPE VND830SP
(*) Per each channel

RDS(on) 60 m (*)

IOUT 6 A (*)

VCC 36 V

n CMOS COMPATIBLE INPUTS n OPEN DRAIN STATUS OUTPUTS n ON STATE OPEN LOAD DETECTION n OFF STATE OPEN LOAD DETECTION n SHORTED LOAD PROTECTION n UNDERVOLTAGE AND OVERVOLTAGE

10

1

PowerSO-10TM

SHUTDOWN n LOSS OF GROUND PROTECTION n VERY LOW STAND-BY CURRENT
n REVERSE BATTERY PROTECTION (**)

ORDER CODES
PACKAGE TUBE PowerSO-10TM VND830SP T&R VND830SP13TR

DESCRIPTION The VND830SP is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient BLOCK DIAGRAM

compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

VCC

VCC CLAMP

OVERVOLTAGE UNDERVOLTAGE

GND INPUT1 STATUS1

CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP. 1 LOGIC OPENLOAD ON 1 CURRENT LIMITER 2 DRIVER 2 OUTPUT2

INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD OFF 2 OVERTEMP. 2 OPENLOAD ON 2

(**) See application schematic at page 8

Rev. 1
1/19

July 2004


VND830SP Datasheet st Download PDF

Add this permalink to your bookmarks for future download of VND830SP datasheet

Permalink: http://datasheet.emcelettronica.com/st/VND830SP

-->