VND830SP-E| Datasheet

VND830SP-E, VND830SPTR-E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

VND830SP-E
DOUBLE CHANNEL HIGH SIDE DRIVER
Table 1. General Features
Type VND830SP-E RDS(on) 60m (*)

Figure 1. Package
Iout
6A (*)

VCC
36V

(*) Per each channel

n CMOS COMPATIBLE INPUTS n OPEN DRAIN STATUS OUTPUTS n ON STATE OPEN LOAD DETECTION n OFF STATE OPEN LOAD DETECTION n SHORTED LOAD PROTECTION n UNDERVOLTAGE AND OVERVOLTAGE

SHUTDOWN
n LOSS OF GROUND PROTECTION n VERY LOW STAND-BY CURRENT n REVERSE BATTERY PROTECTION (**)
s

PowerSO-10TM

IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE

DESCRIPTION The VND830SP-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

Active current limitation combined with thermal shutdown and automatic restart protects the device against overload.The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.

Table 2. Order Codes
Package PowerSO-10TM
Note: (**) See application schematic at page 9

Tube VND830SP-E

Tape and Reel VND830SPTR-E

Rev. 1 October 2004 1/20