REF200| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

REF 200

REF200

REF

200

DUAL CURRENT SOURCE/CURRENT SINK
FEATURES
q COMPLETELY FLOATING: No Power Supply or Ground Connections q HIGH ACCURACY: 100uA 0.5% q LOW TEMPERATURE COEFFICIENT: 25ppm/ C q WIDE VOLTAGE COMPLIANCE: 2.5V to 40V q ALSO INCLUDES CURRENT MIRROR

APPLICATIONS
q SENSOR EXCITATION q BIASING CIRCUITRY q OFFSETTING CURRENT LOOPS q LOW VOLTAGE REFERENCES q CHARGE-PUMP CIRCUITRY q HYBRID MICROCIRCUITS

DESCRIPTION
The REF200 combines three circuit building-blocks on a single monolithic chip--two 100uA current sources and a current mirror. The sections are dielectrically isolated, making them completely independent. Also, since the current sources are twoterminal devices, they can be used equally well as current sinks. The performance of each section is individually measured and laser-trimmed to achieve high accuracy at low cost. The sections can be pin-strapped for currents of 50uA, 100uA, 200uA, 300uA or 400uA. External circuitry can be used to obtain virtually any current. These and many other circuit techniques are shown in the Applications section of this Data Sheet. The REF200 is available in plastic 8-pin mini-DIP and SOIC packages.
I1 High 8 I2 High 7 Substrate 6 Mirror In 5

100uA

1 I1 Low

2 I2 Low

3 Mirror Common

4 Mirror Out

International Airport Industrial Park Mailing Address: PO Box 11400, Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 Tel: (520) 746-1111 Twx: 910-952-1111 Internet: http://www.burr-brown.com/ FAXLine: (800) 548-6133 (US/Canada Only) Cable: BBRCORP Telex: 066-6491 FAX: (520) 889-1510 Immediate Product Info: (800) 548-6132

1988 Burr-Brown Corporation

PDS-851D

Printed in U.S.A. October, 1993

SBVS020