SN65HVD10-EP| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SN65HVD10-EP, SN65HVD11-EP , SN65HVD12-EP
www.ti.com SGLS278E DECEMBER 2004 REVISED SEPTEMBER 2007

3.3 V RS-485 TRANSCEIVERS
1

FEATURES
Controlled Baseline One Assembly/Test Site One Fabrication Site Extended Temperature Performance of Up to 40 C to 125 C and 55 C to 125 C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree (1) Operates With a 3.3 V Supply Bus-Pin ESD Protection Exceeds 16 kV HBM 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus) Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 10 Mbps, and 25 Mbps (2) Meets or Exceeds the Requirements of ANSI TIA/EIA-485-A Bus-Pin Short Circuit Protection From 7 V to 12 V Low-Current Standby Mode . . . 1 A (Typ) Open-Circuit, Idle-Bus, and Shorted-Bus Failsafe Receiver Thermal Shutdown Protection Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications SN75176 Footprint
Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

APPLICATIONS
Digital Motor Control Utility Meters Chassis-to-Chassis Interconnects Electronic Security Stations Industrial Process Control Building Automation Point-of-Sale (POS) Terminals and Networks
D PACKAGE (TOP VIEW)

R RE DE D

1 2 3 4

8 7 6 5

VCC B A GND

DESCRIPTION/ORDERING INFORMATION
The SN65HVD10, SN65HVD11, and SN65HVD12 combine a 3-state differential line driver and differential input line receiver that operate with a single 3.3 V power supply. They are designed for balanced transmission lines and meet or exceed ANSI standard TIA/EIA-485-A and ISO 8482:1993. These differential bus transceivers are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. The drivers and receivers have active-high and active-low enables respectively, that can be externally connected together to function as direction control. Low device standby supply current can be achieved by disabling the driver and the receiver. The driver differential outputs and receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These parts feature wide positive and negative common-mode voltage ranges, making them suitable for party
-line applications.

(1)

(2)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.