SN65HVD3083E| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

www.ti.com

SN65HVD3080E SN65HVD3083E SN65HVD3086E
SLLS771B NOVEMBER 2006 REVISED MARCH 2007

LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS
1

FEATURES
Low Quiescent Power 375 A (Typical) Enabled Mode 2 nA (Typical) Shutdown Mode Small MSOP Package 1/8 Unit-Load--Up to 256 Nodes per Bus 16 kV Bus-Pin ESD Protection, 6 kV All Pins Failsafe Receiver (Bus Open, Short, Idle) TIA/EIA-485A Standard Compliant RS-422 Compatible

SN65HVD308xE (TOP VIEW)

R RE DE D GND
DEVICE

1 2 3 4 5

9 8 7

VCC A B Z Y

APPLICATIONS
Motion Controllers Point-of-Sale (POS) Terminals Rack-to-Rack Communications Industrial Networks Power Inverters Battery-Powered Applications Building Automation

SIGNAL RATE 200 kbps 1 Mbps 20 Mbps

SN65HVD3080E SN65HVD3083E SN65HVD3086E

DESCRIPTION
Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus networks. Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard. With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps. The devices are designed to operate with a low supply current, less than 1 mA (typical), exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal for power-sensitive applications. The wide common-mode range and high ESD protection levels of these devices make them suitable for demanding applications such as motion controllers, electrical inverters, industrial networks, and cabled chassis interconnects where noise tolerance is essential. These devices are characterized for operation over the temperature range -40 C to 85 C
Enabled ICC
ISL

MAX

350

370

390

410

430

450

470

490

510

530

550

Current - mA

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.