tsop361x| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

TSOP361..
Vishay Semiconductors

IR Receiver Modules for Remote Control Systems
FEATURES
Photo detector and preamplifier in one package Internal filter for PCM frequency Continuous data transmission possible
3 4
16797

TTL and CMOS compatibility Output active low Supply voltage: 2.7 V to 5.5 V Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

MECHANICAL DATA
Pinning 1 = GND, 2 = GND, 3 = VS, 4 = OUT

SPECIAL FEATURES
Enhanced data rate up to 4000 bit/s Operation with short burst possible ( 6 cycles/burst) Taping available for topview and sideview assembly

DESCRIPTION
The TSOP361.. series are miniaturized SMD-IR receiver modules for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with short burst transmission codes and high data rates at a supply voltage of 3 V. This component has not been qualified according to automotive specifications.

PARTS TABLE
CARRIER FREQUENCY 30 kHz 33 kHz 36 kHz 36.7 kHz 38 kHz 40 kHz 56 kHz SHORT BURSTS AND HIGH DATA RATES (AGC1) TSOP36130 TSOP36133 TSOP36136 TSOP36137 TSOP36138 TSOP36140 TSOP36156

BLOCK DIAGRAM
3 30 k VS 4 Input AGC Band pass Demo dulator OUT

APPLICATION CIRCUIT
17170

Circuit

Transmitter with TSALxxxx

R 1 = 100 TSOPxxxx VS OUT GND VO C1 = 4.7 uF uC GND + VS

1; 2 PIN
16839

Control circuit

GND

R1 and C1 recommended to suppress power supply disturbances. The output voltage should not be hold continuously at a voltage below VO = 2.0 V by the external circuit.

Document Number: 82191 Rev. 1.6, 20-Aug-08

www.vishay.com 189