z801800zco| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SUPPORT PRODUCT

Z8018100ZCO
DEVELOPMENT KIT
DESCRIPTION
The kit contains an assembled circuit board, software and documentation to support software and hardware development for the Z80181 device. The supplied cross assembler and link/loader package allows full assembly language support. A board resident debug monitor program allows object code to be downloaded and subsequently debugged.

KIT CONTENTS
Z80181 Evaluation Board CMOS Z80181 MPU 19.6608 MHz Crystal Socketed (32K) /8K x 8 EPROM (programmed with Debug Monitor) Socketed (32K) /8K x 8 Static RAM RS-232C Interface Z80181 MPU Expansion Header Z80181 Peripheral Signal Expansion Header Reset switch NMI switch Cables 25-Pin RS-232 Cable Software (IBM*-PC Platform) Z8/Z80/Z8000 Cross Assembler MOBJ Link/Loader Resident Debug Monitor Source Code Z80181 Example Software Documentation Z80181 Kit User Guide Z80 Family Data Book Z80181 Product Specification Z85C30 Product Specification Z80 Cross Assembler User Guide MOBJ Link/Loader User Guide Zilog short form catalog

SPECIFICATIONS
Power Requirements +5 Vdc @ .65 A Dimensions Width: 3.65 in. (9.27 cm) Length: 4.20 in. (10.67 cm) Serial Interface RS-232C @ 9600 bits/sec.

1997 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from intellectual property infringement. Zilog, Inc. makes no warranty of merchantability or fitness for any purpose. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment to update or keep current the information contained in this document.

Zilog's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to such intended use is executed between the customer and Zilog prior to use. Life support devices or systems are those which are intended for surgical implantation into the body, or which sustains life whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 Telex 910-338-7621 FAX 408 370-8056 Internet: http://www.zilog.com

DC-4034-01

7-1